Industrial heat pumps

Heat industrial buildings using air, earth and sun! Industrial air-to-water heat pumps are an exceptional way of simply heating industrial halls and production areas using ambient temperatures and waste heat generated during production. Only a small amount of electricity is required to operate them. Therefore you will save money on heating and in addition, you will have environmentally friendly heat. Another undeniable advantage is the relatively fast and cost-effective installation.

Basic principle and operation of air-to-water heat pumps

The heat pump's heat is obtained from the air from the environment where the pump is located. The heat pump does not burn anything and therefore does not require a high amount of energy that is otherwise consumed during the combustion process. In addition, waste heat which is generated during production and which would otherwise not be used in any way can also be used. The heat pumps we supply operate on the ground-to-water, water-to-water or air-to-water principle. Therefore these pumps use the heat from the ground, water and air to heat the water which is further used for space heating. They can also be easily used for cooling, with the water removing heat from the building.

A new building is not a precondition for installing an industrial heat pump. Existing buildings can be equipped with a pump during a renovation to create a bivalent system in which both heating systems can cooperate at a lower cost than the use of the original heating system alone.

Features

  • Significantly cheaper than other heating methods (only a fraction of electricity is required to operate the heat pump).
  • Low CO2 emissions due to the absence of combustion and other chemical and physical processes that may cause them.
  • Ability to heat and cool in one device.
  • Use of heat that is free and that would otherwise be unused (e.g. ambient heat or residual heat from production).
  • Environmentally friendly heating method.
  • Possible to combine with conventional heating systems with bivalent connection.

Why CHP Trading pumps?

  1. We provide comprehensive services from consultations, installation or service.
  2. We work with renowned suppliers such as Viessmann, Thermax, AHI Carrier or MTA.
  3. We offer many years' experience in the field and our own know-how.
  4. We keep up with modern times. Our employees are constantly and regularly trained in the latest technologies in the industry.

Harnessing the benefits of heat pumps in industry

Industrial heat pumps can be used in any industry where heating or cooling is required. They are suitable for both the food and chemical industries or any other production sector. Similarly, industrial heat pumps are often installed in commercial and recreational buildings where conventional heating methods would be too expensive (e.g. shopping centres, ice arenas and swimming pools).

  • The cheapest way to heat and cool large halls.
  • Low investment costs compared to gas boilers and cooling units.
  • Customised solutions.
  • Eco-friendly use of natural and waste heat sources.
  • High temperature up to 90°C using a heat pump.
  • Possibility of receiving a state subsidy under the New Green Savings Programme.

 

Ground-to-water and water-to-water heat pumps outputs 21-283 kW

These heat pumps use the heat stored in the ground and water for their operation. Heat is obtained from the ground using ground collectors and boreholes and is also suitable for cold areas. Getting heat from water is possible from both surface water and groundwater.

Vitocal 300-G BW

  • Maximum outlet temperature: 60°C
  • COP up to 4.83 (B0/W35) up to 6.0 (W10/W35)
  • EU energy efficiency class: A++
  • Vitotronic 200 WO1C equithermal regulation
  • Single-compressor ON/OFF design
  • Maximum operating pressure primary/secondary: 3 Bar
  • Cascading – Master/Slave

Vitocal 200-G Pro A-Series

  • Maximum outlet temperature: 60°C
  • COP up to 4.66 (B0/W35) up to 6.1 (W10/W35)
  • Applications for standard heating systems
  • NC Cooling function: passive cooling function
  • EU energy efficiency class: A++
  • Vitotronic 200 WO1C equithermal regulation
  • Net price -20% (compared to Vitocal 300-G PRO Dxxx)
  • Designed to be installed in a corner of the room
  • Dual-compressor ON/OFF design
  • Maximum operating pressure primary/secondary: 10 Bar

Vitocal 300-G Pro D-Series

  • Maximum outlet temperature: 60°C
  • COP up to 4.6 (B0/W35) up to 5.85 (W10/W35)
  • Applications for standard heating systems
  • NC Cooling function: passive cooling function
  • EU energy efficiency class: A++
  • Vitotronic 200 WO1C (SPS DS-series) equithermal regulation
  • Dual-compressor ON/OFF design
  • Maximum operating pressure primary/secondary: 10 Bar

Vitocal 350-HT Pro

  • Maximum outlet temperature: 90°C (secondary)
  • Maximum inlet temperature: 50°C (primary)
  • COP up to 4.3 (B0/W35) up to 5.5 (W10/W35)
  • Applications for heating systems with the required temperature up to 90°C
  • NC/AC Cooling function: passive/active cooling function
  • EU energy efficiency class: A++
  • Vitotronic SPS DS equithermal regulation
  • Dual-compressor and three-compressor ON/OFF design
  • Maximum operating pressure primary/secondary: 10 Bar

I am interested

 

Air-to-water heat pumps outputs 20–250 kW

No underground boreholes or required water conditions are required for air-to-water heat pumps. They use the heat contained in the air and are most suitable for the Czech Republic's climatic conditions.

Energycal AW PRO AT

  • Maximum outlet temperature: 65°C
  • COP up to 4.13 (A7/W35) up to 3.82 (A2/W35)
  • EER up to 3.93 (A35/W18) up to 3.31 (A35/W7)
  • EU energy efficiency class: A
  • IC200CX EVO equithermal regulation
  • Single-compressor ON/OFF design
  • Maximum secondary operating pressure: 6 Bar

Energycal AW PRO AT

  • Maximum outlet temperature: 65°C
  • COP up to 4.18 (A7/W35) up to 3.86 (A2/W35)
  • EER up to 3.73 (A35/W18) up to 3.00 (A35/W7)
  • EU energy efficiency class: A
  • IC200CX EVO equithermal regulation
  • Dual-compressor ON/OFF design
  • Maximum secondary operating pressure: 6 Bar

Energycal AW PRO MT

  • Maximum outlet temperature: 62°C
  • COP up to 4.2 (A7/W35) up to 3.7 (A2/W35)
  • EER up to 3.75 (A35/W18) up to 3.02 (A35/W7)
  • EU energy efficiency class: A
  • IC200CX EVO equithermal regulation
  • Dual-compressor ON/OFF design
  • Two separate coolant circuits
  • Maximum secondary operating pressure: 6 Bar

New Energycal AW PRO HT EVO

  • Maximum outlet temperature: 80°C
  • COP to 3.52 (A7/W45) to 2.43 (A7/W70)
  • EER up to 2.89 (A35/W7)
  • EU energy efficiency class: A+
  • IC200CX EVO equithermal regulation
  • Dual-compressor ON/OFF design
  • Two separate coolant circuits
  • Maximum secondary operating pressure: 6 Bar

I am interested

 

What can CHP Trading offer?

Sale

We sell industrial heat pumps from well-known brands like Viessmann, Thermax, AHI Carrier or MTA.

Service

Our trained specialists will assist you in all situations, whether installation, commissioning, maintenance or service. We offer remote 24/7 supervision and 10 years' full service.

Consulting

We will be happy to advise you in the field of industrial heat pumps and other areas of energy. Possibility of personal consultation and preparation of a professional comprehensive study.

Solution proposals

We will design and deliver the most advantageous solution in terms of price/performance ratio based on our own analytical analyses.